NB1058ISW

GLOBAL BRAND CROSS-REFERENCE

Analog Devices Inc.

IC OPAMP JFET 4 CIRCUIT 16SO

LT1058ISW

High-reliability design
Long-term stable supply
RoHS compliant

IC OPAMP JFET 4 CIRCUIT 16SO

1. PRODUCT POSITIONING

NB1058ISW is a product identity corresponding to the reference product LT1058ISW. This document presents the available product specifications, mechanical/package information and compatibility summary for engineering and procurement reference.

This document is a product information. Compatibility conclusions should be read together with the applicable Cross-Reference Identification (CID) rule, package/pin verification and engineering review record.

2. TECHNICAL SPECIFICATION COMPARISON (core parameters)
Parameter	Analog Devices Inc. LT1058ISW	ChipNobo NB1058ISW	Match
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	✓
Part Status	Last Time Buy	Last Time Buy	✓
Voltage - Supply Span (Max)	36 V	36 V	✓
Mounting Type	Surface Mount	Surface Mount	✓
Number of Circuits	4	4	✓
Amplifier Type	J-FET	J-FET	✓
Slew Rate	13V/µs	13V/µs	✓
Gain Bandwidth Product	5 MHz	5 MHz	✓
Package / Case	16-SOIC (0.295", 7.50mm Width)	16-SOIC (0.295", 7.50mm Width)	✓
Supplier Device Package	16-SO	16-SO	✓
Current - Input Bias	10 pA	10 pA	✓
Current - Supply	1.7mA (x4 Channels)	1.7mA (x4 Channels)	✓
Voltage - Supply Span (Min)	20 V	20 V	✓
Voltage - Input Offset	350 µV	350 µV	✓
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	✓
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	✓

3. SUPPLY & LIFECYCLE
ChipNobo Number	NB1058ISW
Lifecycle status	Last Time Buy
NRND	No
EOL	No
PCN monitor	No
Last buy date	No Deadline
Alternate availability	Sufficient

CHIPNOBO

Semiconductor Replacement Engineering & Supply Continuity

About Instrumentation, OP Amps, Buffer Amps

PRODUCT DATASHEET

4. APPLICATION AREAS
ADAS Camera System	Battery Management System (BMS)
Electric Vehicle (EV)	AI Server
GPU Server	PLC Controller
Industrial Robot	Semiconductor Equipment
Medical Monitoring Equipment	Medical Imaging Equipment
5G Base Station	Laboratory Equipment

5. ENGINEERING & COMMERCIAL NOTES

The ChipNobo MPN is the public product identity used by ChipNobo for this replacement reference.
The original manufacturer and original MPN are retained as reference identity information.
Product PDF data are intended for engineering, procurement and supply-continuity reference.
Current price, MOQ, lead time, available supply source and regional availability should be confirmed through RFQ.
For customer-specific qualification, PCB footprint approval, reliability requirements or design-in approval, the customer should perform the applicable validation process.

Document purpose: Product Information / Replacement Reference · Generated from the product data supplied for NB1058ISW.

Important Notice & Disclaimer

Document ID: 【CN-DATA-NB1058ISW】 Revision: 1.0 Status: Released

The information provided by ChipNobo is intended solely for engineering evaluation, product selection, procurement, and supply continuity reference purposes. Product specifications, lifecycle status, availability, and other information are subject to change without notice. Customers should always verify relevant information against the latest official documentation published by the respective manufacturers.

Cross-reference and replacement recommendations are provided for engineering reference purposes only. They do not constitute a guarantee of pin-to-pin compatibility, interchangeability, or suitability for any particular application. Customers are responsible for conducting all necessary engineering reviews, testing, and qualification prior to product selection and use.

Manufacturer names, trademarks, and part numbers are referenced solely for product identification purposes. Their use does not imply any affiliation with, endorsement by, or authorization from the respective manufacturers, unless expressly stated otherwise.

To the maximum extent permitted by applicable law, ChipNobo makes no warranties, express or implied, regarding the completeness, accuracy, or suitability of the information provided and shall not be liable for any loss or damage arising from its use or reliance, except as otherwise expressly agreed in writing and subject to applicable law.